The Sirona^™ Simply collection is a bromine-free, chlorine-free solution designed to keep spa water sparkling clear and relaxation ready.

Start-up

1. Once you’ve cleaned the surface of the spa, fill it with water, run the pump/filter, and add Sirona™ Simply Waterline Control according to the system dosage chart on the next page to prevent waterline build-up. Ensure that you shake the bottle before adding and follow label instructions to add the correct amount to the water.
2. Add Sirona™ Simply Oxidizer non-chlorine shock oxidizer according to the system dosage chart on the next page. Sirona™ Simply Oxidizer is specially designed to keep spa water sparkling clear.
3. Once Sirona™ Simply Oxidizer is added, circulate the water for at least 15 minutes on high speed. Next add the Sirona™ Simply Sanitizer according to the system dosage chart on the next page and circulate the water again for 15 minutes.
4. Finally, test the water with Sirona™ Simply Test Strips to ensure you have achieved the proper water balance. Your pH should read between 7.2 – 7.8. The alkalinity should be in the range of 80 – 120 ppm and the calcium hardness should range between 150 – 400 ppm. Your Sirona™ Simply Sanitizer level should be between 30 – 50 ppm.